Pair of Etched Mortice Hearts

Tin Lizzie

Pair of Etched Mortice Hearts

Regular price £21.99
Unit price  per 
Tax included. Shipping calculated at checkout.


Only 1 left.


A pair of very pretty ceramic mortice knobs. The diameter of these knobs is 6cm. They are supplied with the ceramic knobs on a sprung metal base and the metal bar to connect the knobs.

Fitting Instructions

Each item is supplied with the knob itself, a metal bolt, two nuts and a washer. There are two ways of fitting the knob, both ways are very quick and very easy. Which you choose is just personal preference.

If you want to fix the flange so that it faces the knob:

  • If there isn't a pre-existing hole in the drawer or door to which you are going to fit the knob, first drill a hole. A 5mm diameter drill bit is ideal. 
  • Remove the nuts and washers from the bolt.
  • Ensure that the flange is facing the knob and then push the bolt through the drilled hole in your drawer until the flange is flush with the drawer front.
  • Put one of the washers and one nut over the bolt and tighten until the knob is fixed firmly, take care not to overtighten.

If you want to fix the flange so that it is facing away:

  • If there isn't a pre-existing hole in the drawer or door to which you are going to fit the knob, first drill a hole. 
  • Unscrew the nuts and remove both washers from the bolt.
  • Turn the flange round so that it will allow the ceramic knob to stand proud of the door/drawer.
  • Thread one washer and one nut onto the bolt and tighten to secure the flange in place.
  • Push the bolt through the drilled hole in your drawer until the flange is flush with the drawer front.
  • Put the remaining washer and nut over the bolt and tighten the nut until the knob is fixed snugly.